Download | Marlin Firmware[^2^]
S-Color U709 Flash File Tab MT6572 5.1 Firmware Tested
If you own a S-Color U709 Tab, you might be wondering how to flash it with a new firmware. Flashing is a process of installing a new software or operating system on your device, which can improve its performance, fix bugs, or add new features. In this article, we will show you how to download and flash S-Color U709 Flash File Tab MT6572 5.1, which is a tested and official firmware for your device. We will also explain the benefits and risks of flashing, as well as how to troubleshoot some common issues with S-Color U709 Tab.
S-Color U709 Flash File Tab MT6572 5.1 | Firmware | Tested
What is S-Color U709 Tab and why you might need to flash it
S-Color U709 Tab is a tablet device that runs on Android 5.1 Lollipop operating system. It has a 7-inch TFT LCD display with a resolution of 1200 x 2000 pixels, an 8 MP rear camera, a 5 MP front camera, a MediaTek MT6572 chipset, a quad-core processor, a Mali-400 GPU, 2 GB of RAM, 16 GB of internal storage, a microSD card slot, a dual SIM slot, a micro USB port, a 3.5 mm audio jack, Wi-Fi, Bluetooth, GPS, and a 3000 mAh battery. It was released in 2018 by S-Color, a Chinese brand that specializes in low-cost smartphones and tablets.
You might need to flash your S-Color U709 Tab if you want to:
Upgrade or downgrade your device's firmware to a newer or older version
Fix some software issues such as bootloop, hang on logo, lagging, crashing, or freezing
Remove malware, viruses, or unwanted apps from your device
Unroot or root your device for more customization options
Change the language or region of your device
Unlock or bypass FRP (Factory Reset Protection) lock on your device
What are the benefits of flashing S-Color U709 Tab
Flashing your S-Color U709 Tab can have some benefits such as:
Improving your device's performance, speed, stability, and battery life
Fixing some bugs or glitches that affect your device's functionality
Adding new features or functions that are not available in your current firmware
Enhancing your device's security and privacy by removing malware or bloatware
Customizing your device's appearance or settings according to your preferences</ What are the common issues with S-Color U709 Tab and how to fix them
Despite the benefits of flashing, you might also encounter some issues with your S-Color U709 Tab after flashing or during the flashing process. Some of the common issues are:
Your device does not turn on or gets stuck on the boot screen
Your device shows a white or black screen or displays some errors
Your device does not recognize your SIM card or network signal
Your device does not connect to Wi-Fi or Bluetooth devices
Your device does not charge or drains battery quickly
Your device does not have sound or camera quality is poor
These issues can be caused by various factors such as incompatible firmware, corrupted files, faulty drivers, hardware problems, or human errors. To fix these issues, you can try some of the following solutions:
Make sure you download the correct and tested firmware for your S-Color U709 Tab from a reliable source
Make sure you follow the flashing instructions carefully and do not skip any steps
Make sure you backup your data before flashing and restore it after flashing
Make sure you charge your device fully before flashing and use a good USB cable and port
Make sure you install the latest drivers and software for your device and computer
Make sure you wipe cache and data after flashing and perform a factory reset if necessary
Make sure you update your device's firmware and apps regularly after flashing
If none of the above solutions work, you can contact S-Color customer service or visit a professional repair shop for assistance
How to download S-Color U709 Flash File
Now that you know the benefits and risks of flashing, let's move on to the first step of flashing your S-Color U709 Tab: downloading the firmware file. Here are the steps to download S-Color U709 Flash File Tab MT6572 5.1:
Where to find the official and tested firmware for S-Color U709 Tab
The best place to find the official and tested firmware for your S-Color U709 Tab is from the manufacturer's website. You can also find some other sources online that provide firmware files for various devices, but make sure they are trustworthy and verified by other users. Some of the popular websites that offer firmware files are FirmwareFile, Needrom, RomKingz, and FirmwareX. You can search for your device model and version on these websites and download the firmware file from there.
How to check the compatibility and version of the firmware
Before you download the firmware file, you need to check if it is compatible with your device model and version. You can do this by checking the build number of your device's current firmware. To check the build number, go to Settings > About Phone > Build Number on your device. You will see a string of letters and numbers that indicate your device's model, chipset, Android version, and firmware version. For example, if your build number is S-Color_U709_MT6572_5.1_ALPS.L1.MP6.V2.19_VANZO6580.WE.L_P69, it means that your device model is S-Color U709, your chipset is MT6572, your Android version is 5.1, and your firmware version is ALPS.L1.MP6.V2.19_VANZO6580.WE.L_P69.
You need to download a firmware file that matches your device's model, chipset, Android version, and firmware version. If you download a wrong or incompatible firmware file, you might brick your device or cause some serious problems. You can compare the build number of your device with the build number of the firmware file that you want to download. If they are identical or very similar, then you can proceed to download the firmware file. If they are different or incompatible, then you need to look for another firmware file that suits your device.
How to download and extract the firmware file on your computer
Once you have found a compatible firmware file for your S-Color U709 Tab, you can download it on your computer. The firmware file is usually in a compressed format such as ZIP or RAR, which contains several files such as scatter file, preloader file, recovery file, system file, userdata file, cache file, etc. These files are essential for flashing your device using SP Flash Tool.
To download the firmware file, click on the download link or button on the website where you found the firmware file. You might need to enter some captcha or password to verify that you are not a robot or to access the file. You might also need to wait for some time or click on some ads before the download starts. Be careful not to click on any malicious or fake links or buttons that might harm your computer or device.
After the download is complete, you need to extract the firmware file on your computer. You can use any software that can extract ZIP or RAR files, such as WinRAR, 7-Zip, or PeaZip. To extract the firmware file, right-click on the file and select Extract Here or Extract to Folder. You will see a new folder with the same name as the firmware file, which contains all the files that you need for flashing your device.
How to flash S-Color U709 Tab using SP Flash Tool
Now that you have downloaded and extracted the firmware file, you can proceed to the next step of flashing your S-Color U709 Tab: using SP Flash Tool. SP Flash Tool is a software that can flash MediaTek devices with scatter-based firmware files. It is compatible with Windows and Linux operating systems. Here are the steps to flash S-Color U709 Tab using SP Flash Tool:
What is SP Flash Tool and how to install it on your computer
SP Flash Tool is a software that can flash MediaTek devices with scatter-based firmware files. It can also perform other tasks such as backup and restore, format, memory test, parameter settings, etc. It is compatible with Windows and Linux operating systems.
To install SP Flash Tool on your computer, you need to download it from its official website or from other sources online. Make sure you download the latest version of SP Flash Tool that supports your device model and chipset. The SP Flash Tool file is also in a compressed format such as ZIP or RAR, which contains several files such as flash_tool.exe, DA_SWSEC.bin, MT65xx_USB_VCOM_drivers, etc.
To install SP Flash Tool on your computer, you need to extract it on your computer using any software that can extract ZIP or RAR files, such as WinRAR, 7-Zip, or PeaZip. To extract SP Flash Tool on your computer, right-click on the file and select Extract Here or Extract to Folder. You will see a new folder with the same name as SP Flash Tool file, which contains all the files that you need for flashing your device. How to backup your data and prepare your device for flashing
Before you flash your S-Color U709 Tab, you need to backup your data and prepare your device for flashing. This is because flashing can erase all your data and settings on your device, and can also cause some errors or problems if not done properly. To backup your data and prepare your device for flashing, you need to do the following:
Backup your data: You can use any app or software that can backup your data, such as Google Drive, Dropbox, Titanium Backup, etc. You can also copy your data to your computer or external storage device manually. You should backup your contacts, messages, photos, videos, music, documents, apps, etc.
Charge your device: You should charge your device fully or at least 50% before flashing. This is to prevent your device from shutting down during the flashing process, which can cause some serious damage to your device.
Enable USB debugging: You should enable USB debugging on your device to allow SP Flash Tool to communicate with your device. To enable USB debugging, go to Settings > Developer Options > USB Debugging on your device. If you don't see Developer Options on your device, go to Settings > About Phone > Tap on Build Number 7 times to activate it.
Remove SIM card and SD card: You should remove your SIM card and SD card from your device before flashing. This is to prevent any interference or corruption of your data or firmware during the flashing process.
How to connect your device to your computer and load the firmware file
After you have backed up your data and prepared your device for flashing, you need to connect your device to your computer and load the firmware file on SP Flash Tool. To do this, you need to do the following:
Install drivers: You need to install the drivers for your device and chipset on your computer. The drivers are usually included in the SP Flash Tool folder that you extracted earlier. To install the drivers, go to the SP Flash Tool folder and open the MT65xx_USB_VCOM_drivers folder. Right-click on InstallDriver.exe and select Run as administrator. Follow the instructions on the screen to install the drivers.
Launch SP Flash Tool: You need to launch SP Flash Tool on your computer. To launch SP Flash Tool, go to the SP Flash Tool folder and double-click on flash_tool.exe. A window will pop up with some options and buttons.
Load scatter file: You need to load the scatter file on SP Flash Tool. The scatter file is a text file that contains the information and location of all the firmware files that you need for flashing. To load the scatter file, click on Choose in the Scatter-loading File section on SP Flash Tool. A window will open where you can browse and select the scatter file from the firmware folder that you extracted earlier. The scatter file is usually named MT6572_Android_scatter.txt or something similar. After you select the scatter file, click on Open. SP Flash Tool will load all the firmware files automatically and display them in a table.
Select download only: You need to select download only mode on SP Flash Tool. This mode will only flash the firmware files without affecting any other data or settings on your device. To select download only mode, click on Download Only in the Download section on SP Flash Tool.
Connect your device: You need to connect your device to your computer using a good USB cable and port. Make sure your device is powered off and USB debugging is enabled. After you connect your device, SP Flash Tool will detect it and show a COM port number in the Status section.
How to start the flashing process and monitor the progress
After you have connected your device and loaded the firmware file, you can start the flashing process and monitor the progress on SP Flash Tool. To do this, you need to do the following:
Start flashing: You need to start flashing by clicking on Download in the Download section on SP Flash Tool. A warning message will pop up asking you if you are sure you want to proceed. Click on Yes to confirm and start flashing.
Monitor progress: You need to monitor the progress of the flashing process on SP Flash Tool. The progress bar will show you how much of the firmware has been flashed so far. The color of the progress bar will change from red to yellow to purple to green as different parts of the firmware are flashed.
Wait for completion: You need to wait for the flashing process to complete successfully. The flashing process can take several minutes depending on the size of the firmware and the speed of your computer and device. Do not disconnect or interrupt your device or computer during the flashing process, as this can damage your device or cause some errors. When the flashing process is complete, SP Flash Tool will show a green circle with a check mark and a Download OK message.
How to verify the flashing result and reboot your device
After the flashing process is complete, you need to verify the flashing result and reboot your device. To do this, you need to do the following:
Verify flashing result: You need to verify that the flashing result is successful and that your device is working properly. To verify the flashing result, you can check the build number of your device's new firmware. To check the build number, go to Settings > About Phone > Build Number on your device. You should see the same or similar build number as the firmware file that you flashed. If you see a different or incompatible build number, it means that the flashing result is not successful or that you flashed a wrong or corrupted firmware file.
Reboot your device: You need to reboot your device to apply the changes and complete the flashing process. To reboot your device, you can either disconnect it from your computer and press the power button, or click on Reboot in the Format section on SP Flash Tool. Your device will restart and boot into the new firmware.
Conclusion
In this article, we have shown you how to download and flash S-Color U709 Flash File Tab MT6572 5.1, which is a tested and official firmware for your device. We have also explained the benefits and risks of flashing, as well as how to troubleshoot some common issues with S-Color U709 Tab. Flashing can improve your device's performance, fix bugs, or add new features, but it can also cause some problems or errors if not done properly. Therefore, you should always backup your data, follow the instructions carefully, and use the correct and compatible firmware for your device.
We hope this article has been helpful and informative for you. If you have any questions or feedback, please feel free to leave a comment below. We would love to hear from you and help you with any issues that you might have with your S-Color U709 Tab.
FAQs
Here are some of the frequently asked questions about S-Color U709 Tab and its firmware:
What are some of the features and specifications of S-Color U709 Tab?
S-Color U709 Tab is a tablet device that runs on Android 5.1 Lollipop operating system. It has a 7-inch TFT LCD display with a resolution of 1200 x 2000 pixels, an 8 MP rear camera, a 5 MP front camera, a MediaTek MT6572 chipset, a quad-core processor, a Mali-400 GPU, 2 GB of RAM, 16 GB of internal storage, a microSD card slot, a dual SIM slot, a micro USB port, a 3.5 mm audio jack, Wi-Fi, Bluetooth, GPS, and a 3000 mAh battery. It was released in 2018 by S-Color, a Chinese brand that specializes in low-cost smartphones and tablets.
What are some of the risks and precautions of flashing S-Color U709 Tab?
Flashing S-Color U709 Tab can have some risks and precautions such as:
Flashing can erase all your data and settings on your device, so you should backup your data before flashing and restore it after flashing
Flashing can cause some errors or problems on your device if not done properly or if you use a wrong or incompatible firmware file
Flashing can void your warranty or damage your device if you use an unofficial or modified firmware file
Flashing can affect your device's security and privacy if you use a malware-infected or untrusted firmware file
You should always charge your device fully before flashing and use a good USB cable and port
You should always follow the instructions carefully and do not skip any steps
You should always download the firmware file from a reliable source and check its compatibility and version
You should always verify the flashing result and reboot your device after flashing
What should I do if I encounter any errors or problems during or after flashing S-Color U709 Tab?
If you encounter any errors or problems during or after flashing S-Color U709 Tab, you can try some of the following solutions:
Make sure you download the correct and tested firmware for your S-Color U709 Tab from a reliable source
Make sure you follow the flashing instructions carefully and do not skip any steps Make sure you backup your data before flashing and restore it after flashing
Make sure you charge your device fully before flashing and use a good USB cable and port
Make sure you install the latest drivers and software for your device and computer
Make sure you wipe cache and data after flashing and perform a factory reset if necessary
Make sure you update your device's firmware and apps regularly after flashing
If none of the above solutions work, you can contact S-Color customer service or visit a professional repair shop for assistance
How can I update or downgrade the firmware of S-Color U709 Tab?
If you want to update or downgrade the firmware of your S-Color U709 Tab, you can follow the same steps as flashing a new firmware. You just need to download the firmware file that matches the version that you want to update or downgrade to, and then flash it using SP Flash Tool. Make sure you check the compatibility and version of the firmware file before downloading and flashing it.
How can I restore the factory settings of S-Color U709 Tab?
If you want to restore the factory settings of your S-Color U709 Tab, you can do it in two ways: using the settings menu or using the recovery mode. To restore the factory settings using the settings menu, go to Settings > Backup & Reset > Factory Data Reset on your device. To restore the factory settings using the recovery mode, power off your device and press and hold the Volume Up and Power buttons together un